http://www.guitarsolos.tv/forum-show.html?&L=1&tx_mmforum_pi1[action]=list_topic&tx_mmforum_pi1[fid]=8 Equipment en Tue, 29 Sep 2026 17:02:31 +0200 mm_forum powered by TYPO3 60 http://www.guitarsolos.tv/forum-show.html?&L=1&tx_mmforum_pi1[action]=list_post&tx_mmforum_pi1[pid]=248 Sun, 25 Nov 2007 20:00:18 +0100 This is a good question. In generall the best speaker for Ampmodelling is one that doesn't "Colour" the Sound in any way, which means it should be linear like Studio or PA Speakers. If you put your amp modelling device directly into a live mixer, than this sould provide the desired sound. But: Devices Like the Pod XT Live offer you a Choice - you can adjust the output signal to fit different needs. For example, if you select "Combo Front" in the output section, PodXT will adjust the sound that you get the best results if you play into a standard Combo input. It does NOT switch off the Speaker Sim, but alters it to work with the setup you like. Anyway, I found out that even podXT sounds best if played into a Tube Power amp and a real Guitarspeaker - but this is a Matter of Taste and of what you expect from your Sound. The Function to alter the output signal is really great, when you don't know what equipment you use on a specific gig (like Competitions, rehersals, or when you sub for someone etc). I hope that does answer ypur question (at last...) As for "What is the right speaker for me" - you gonna have to find out yourself. For me, it's the eminence speakers in my Kulik Design Cabinetts. Best regards Bernd. In generall the best speaker for Ampmodelling is one that doesn't "Colour" the Sound in any way, which means it should be linear like Studio or PA Speakers.
If you put your amp modelling device directly into a live mixer, than this sould provide the desired sound.

But: Devices Like the Pod XT Live offer you a Choice - you can adjust the output signal to fit different needs. For example, if you select "Combo Front" in the output section, PodXT will adjust the sound that you get the best results if you play into a standard Combo input. It does NOT switch off the Speaker Sim, but alters it to work with the setup you like.
Anyway, I found out that even podXT sounds best if played into a Tube Power amp and a real Guitarspeaker - but this is a Matter of Taste and of what you expect from your Sound.

The Function to alter the output signal is really great, when you don't know what equipment you use on a specific gig (like Competitions, rehersals, or when you sub for someone etc).

I hope that does answer ypur question (at last...)

As for "What is the right speaker for me" - you gonna have to find out yourself. For me, it's the eminence speakers in my Kulik Design Cabinetts.

Best regards Bernd.


]]> Equipment berndkiltz http://www.guitarsolos.tv/forum-show.html?&L=1&tx_mmforum_pi1[action]=list_post&tx_mmforum_pi1[pid]=113 Tue, 12 Jun 2007 20:45:09 +0200 Thanks, but no, siggi Braun's shop is far away from where I live, and right now I'm in the US, so that will be difficult... and I plan it for a Neck-Thru Construction, so I would need one large piece of it :? And do you have recommendations for the "sides" of the body, regarding wood :?:
and I plan it for a Neck-Thru Construction, so I would need one large piece of it :?

And do you have recommendations for the "sides" of the body, regarding wood :?: ]]> Equipment Ruben http://www.guitarsolos.tv/forum-show.html?&L=1&tx_mmforum_pi1[action]=list_post&tx_mmforum_pi1[pid]=111 Tue, 12 Jun 2007 20:39:38 +0200 Hey Ruben, Pau Ferro is worth every penny! The only problem is - if you start with it, you want more of it. And its expensive, yes. I would advise you to compare 2 guitars that are nearly the same except the neck - i think you can do this at siggi's coustom shop (if that is within reach of you ?) Rosewood will go along with it as fingerboard, as well as Pau Ferro itself. I love my Pau Ferro Neck !!! regards Bernd.
Pau Ferro is worth every penny!
The only problem is - if you start with it, you want more of it.
And its expensive, yes.
I would advise you to compare 2 guitars that are nearly the same except the neck - i think you can do this at siggi's coustom shop (if that is within reach of you ?)
Rosewood will go along with it as fingerboard, as well as Pau Ferro itself.

I love my Pau Ferro Neck !!!

regards Bernd. ]]> Equipment forum_admin http://www.guitarsolos.tv/forum-show.html?&L=1&tx_mmforum_pi1[action]=list_post&tx_mmforum_pi1[pid]=105 Tue, 12 Jun 2007 20:04:14 +0200 Me again :D Although the rest of my rig is really poor, my guitar is custommade and a real masterpiece. It was built 2 years ago, and some things have changed influencing the needs I have regarding my guitar, and so a new custom guitar is in planning. I heard great things about Pau Ferro as a neck wood from many sources (including Siggi Braun's website) and I was wondering if it really pays to invest in it, or if it doesn't offer enough Quality for the money :?: And which body and fretboard woods go well with it :?:

Although the rest of my rig is really poor, my guitar is custommade and a real masterpiece.
It was built 2 years ago, and some things have changed influencing the needs I have regarding my guitar, and so a new custom guitar is in planning.

I heard great things about Pau Ferro as a neck wood from many sources (including Siggi Braun's website) and I was wondering if it really pays to invest in it, or if it doesn't offer enough Quality for the money :?:
And which body and fretboard woods go well with it :?: ]]> Equipment Ruben http://www.guitarsolos.tv/forum-show.html?&L=1&tx_mmforum_pi1[action]=list_post&tx_mmforum_pi1[pid]=104 Tue, 12 Jun 2007 19:54:27 +0200 I'm just gonna go ahead and post this in the english section since it's blank so far. I am wanting to know more about Cabinetts and Speakers in general, what I have to be on the lookout for when I buy them and what speaker type (regarding my entry in the german equipment section) would go well with ampmodelling etc. and since some already have Cabinett simulations integrated how does the choice of speakers affect the sound :?:
I am wanting to know more about Cabinetts and Speakers in general, what I have to be on the lookout for when I buy them
and what speaker type (regarding my entry in the german equipment section) would go well with ampmodelling etc.
and since some already have Cabinett simulations integrated how does the choice of speakers affect the sound :?: ]]> Equipment Ruben